|
|
|
|
Item # 30034, 6 Inch (in) Brush Diameter, 80 Grit, and 0.055 Inch (in) Filament Diameter Metal Hub Brush with CeramiX® Abrasive Filament
|
|
|
|
|
|
Metal Hub Brushes with CeramiX® Abrasive Filament
The metal hub abrasive wheel brushes feature an innovative 3M™ abrasive grain mineral that provides enhanced cutting action up to 3 to 5 times faster than traditional abrasive filaments. This filament has a tough, hard and self-sharpening abrasive grain with a crystalline structure, which increases the life of the brush.
|
|
|
|
|
|
|
|
|
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35005
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 1/2 in.
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35010
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 5/8 in.
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35015
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 3/4 in.
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35020
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 7/8 in.
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35025
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 1 in.
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35030
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 1-1/4 in.
Wheel Brush Adapter Plates
Description - These slip-fit metal adapters are used for mounting nylon abrasive wheel brushes onto smaller shafts. Sold in pairs. Available for 4-1/4" and 5-1/4" brush ID wheels and 2" brush ID wheels.
Part Number - 35035
Adapter Fits Arbor Hole - 2 in.
Adapter Inside Diameter (ID) - 1-1/2 in.
Wheel Brush Adapter Plates for CNC Machine Shell Mill Holders
Tanis®’ Wheel Brush Adapter, designed by our engineering team to support automated deburring, allows simple attachment of wheel brushes to CNC machines. No hassle coupling is accomplished by placing the adapter plates on both sides of the wheel brush and securing the device with a bolt to the shell mill holder. Set screws prevent the brush from rotating.
Part Number - 35900
Face Width - Standard
Brush Inside Diameter (ID) - 3/4 in.
Pilot - 3/4 in.
Wheel Brush Adapter Plates for CNC Machine Shell Mill Holders
Tanis®’ Wheel Brush Adapter, designed by our engineering team to support automated deburring, allows simple attachment of wheel brushes to CNC machines. No hassle coupling is accomplished by placing the adapter plates on both sides of the wheel brush and securing the device with a bolt to the shell mill holder. Set screws prevent the brush from rotating.
Part Number - 35902
Face Width - Thin
Brush Inside Diameter (ID) - 2 in.
Pilot - 3/4 in.
Wheel Brush Adapter Plates for CNC Machine Shell Mill Holders
Tanis®’ Wheel Brush Adapter, designed by our engineering team to support automated deburring, allows simple attachment of wheel brushes to CNC machines. No hassle coupling is accomplished by placing the adapter plates on both sides of the wheel brush and securing the device with a bolt to the shell mill holder. Set screws prevent the brush from rotating.
Part Number - 35905
Face Width - Standard
Brush Inside Diameter (ID) - 2 in.
Pilot - 3/4 in.
Wheel Brush Adapter Plates for CNC Machine Shell Mill Holders
Tanis®’ Wheel Brush Adapter, designed by our engineering team to support automated deburring, allows simple attachment of wheel brushes to CNC machines. No hassle coupling is accomplished by placing the adapter plates on both sides of the wheel brush and securing the device with a bolt to the shell mill holder. Set screws prevent the brush from rotating.
Part Number - 35907
Face Width - Standard
Brush Inside Diameter (ID) - 2 in.
Pilot - 1-1/4 in.
Wheel Brush Adapter Plates for CNC Machine Shell Mill Holders
Tanis®’ Wheel Brush Adapter, designed by our engineering team to support automated deburring, allows simple attachment of wheel brushes to CNC machines. No hassle coupling is accomplished by placing the adapter plates on both sides of the wheel brush and securing the device with a bolt to the shell mill holder. Set screws prevent the brush from rotating.
Part Number - 35920
Face Width - Double
Brush Inside Diameter (ID) - 2 in.
Pilot - 1-1/4 in.
|
|
|
|
- Machining
- Casting
- Metal Finishing
- Machining Centers
- Manual Operations
|
|
|
|
- Consistency in Manufacturing Process
- High Quality and Low Cost
- Metal Hub Allows for High Temperature Use
- Manual Operations
|
|
|
|
- Deburring Keyways, Slots and Machine Grooves in Parts
- Deburring Gear Splines
- Honing and Finishing of Cylindrical Bores
- Edge Radiusing
- Deburring Seal Grooves in Turbine Engine Cases and Small Aerospace Parts
|
|
|
|
Drive arbors are available for collet mounting applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
